HPC Linear Trough Remote Electronic Ignition Gas Fire Pit Insert
Linear Trough Fire Pit Insert – Electronic Ignition EI
This is our top-of-the-line gas fire pit system featuring the ignition ease with use of a wall switch or handheld remote to control flame as well as auto-relight if flame loss. This is our most advanced control system with numerous convenience and performance improvements for both On/Off Models and our newly introduced High/Low Models- such as High/Low flame control via our new remote or smart phone app, a redesigned hot surface igniter and many other improvements.
Fully Assembled- ready to install. Control components are protected within stainless steel valve box.
Start via wall switch, remote or whole house system; Auto re-light if flame is lost.
Ignition is complete using a robust and reliable Hot Surface igniter.
On/Off models: Use with optional wall switch or Remote Control available.
High/Low Flame Control Models: Adjust high setting to low setting- ~45% turndown (Remote Control and Smatt Phone App included).
120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.
24vac Option: Typically used pool side or with other lower voltage requirements.
Natural Gas or Liquid Propane: Factory built & tested for either fuel.
Internal temperature monitoring with overheat auto shutoff.
CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements. (This new EI system already meets upcoming 2018 ANSI requirements)!
Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff. (See accessories)
Linear Trough Fire Pit Insert Models
Our popular linear fire troughs are available with remote hot surface ignition – complete with EI Technology. This fire pit insert comes fully assembled with control box mounted under pan. Available in 24”, 36”, 48”, 60” & 72” models.
Flame height on all fire pit insert models are 10+”. Warping of pan lip while HOT is common – could cause lip to not sit flush on surface. Please recess lip below enclosure top to hide any warping.
How It Works
Start Up: This is done by use of a wall switch or remote control (or smart phone on Hi/Lo Models. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame. Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence. Shut Down: To turn OFF the fire pit simply use wall switch, remote control or smart phone.